DescriptionNew high flow inline regulator from Empire will fit into standard air source adapter. Air input is at the bottom. Dual gauge ports will allow for measuring output pressure. 90 degree macroline fitting included. Will regulate from 200 - 500 psi.

This is an excellent addition to your paintball marker. Once installed, you will improve your accuracy and control your speed (no more hot shots). The output gauge pressure will also coordinate your speed. Once you chrono your marker, look at the pressure on the gauge. Then you know which pressure reading will give you the approximate desired speed. By controlling the volume of gas that enters the marker, you will save $$ on gas and get more shots per bottle. Use the R-2000 Regulator as a primary speed control on CO2 and as a secondary on a fixed N or HPA system. Machined from a solid block of the highest quality certified aerospace aluminum, it will fit any bottle with standard ASA threads. The tournament sleeve locks up the adjustment system for tournament play - a must, since you can't play tournament if you can't lock your speed control. Specifications: Patented & Designed by CMI Thunder Pig Adjustable 250 PSI to 950 PSI Tested to over 8000 PSI with no failures Adds only 1½ inches to the length of your system - works great with drop forward Weight: 4 oz. or 115 grams - Lightweight and compact Will not freeze when liquid CO2 enters Made from one piece solid tempered aircraft aluminum The efficiency of Nitro or HPA without the expense and hassle Full Manufacturer's Warranty

Smart Parts Micro MaxFlow Reg

SMARTPARTS ION REGULATOR COVER FLAME COMES IN BLACK ONLY THIS WILL NOT FIT THE ION XE IT IS FOR THE OLDER STYLE ION MARKER

Shorty Style Regulator
This reg is 3.5" tall
Maximum input pressure limit is 900psi.
For markers that operate under 200psi, best results are achieved from a low pressure output tank.
Unit is shipped with adjustment screw turned completely clockwise and reg is in the off position.
Turn adjustment screw counter clockwise to increase pressure and clockwise to decrease pressure. For best results, shoot your marker while turning set screw in small increments.

One of the most widely used regulators in paintball from a name you can trust. A Custom Products regulator will deliver the flow and control you need every shot, every time. Features: * Sleek design * Sturdy contruction * Easy to use

DescriptionNew high flow inline regulator from Empire will fit into standard air source adapter. Air input is at the bottom. Dual gauge ports will allow for measuring output pressure. 90 degree macroline fitting included. Will regulate from 200 - 500 psi.FeaturesInline regulator to fit any standard ASAGas input at the bottomHigh flowMultiple gauge ports at the top for best gauge locationadjustable from 0-500Psi

Description This regulator is destined to take its' place in the annals of paintball, as the one that rendered all other screw-ins obsolete.FeaturesAll Myth Regulators are a mid pressure2output (600-650 psi) An astounding less than " in length from ASA to bottle.An unimaginable "Air-lite" weight.User friendly & rebuildable.4500 PSIAll the same incomparable quality, safety, performance and support you have come to expect from Guerrilla Air.